|
An HV probe is better. If you discharge through a resistance (such as an HV probe) there is less chance of bounce back. If you short HV to ground then it will temporarily drop the stored charge, but after awhile it will recover some of that charge....Which is often enough to be worthy of some foul language if you discharge that through your body (ask me how I know). If you use the screw driver and clip lead method leave the clip between the HV connector on the CRT and ground until you are through touching parts in the area of the HV.
A good way to fix HV arcing and corona is to take a damp cloth and clean every surface inside the HV cage. Be careful not to break the wires leaving the fly windings.
|