Quote:
Originally Posted by Phil R
I tried, it definitely changed something, but no real improvement... I ordered 5 6GH8A tubes just in case I'd need some in the future (and I think I might have a few used ones already but no way to test them!). and I hope to get some tools.
Another question, I can hear some static noise sometimes coming from the back of the set, not constantly but sometimes. I know most older CRT TV sets I have seen make this kind of noise sometimes and I haven't been able to locate it but I wouldn't be surprised if it came from the flyback transformer (when you're looking at the back, the noise definitely comes from the right side of the cabinet). With all the comments I read about some late 1960s RCA sets having problems there, should I have a look at something or it's normal?
|
I pulled the Sams on a CTC39 & its pretty much a CTC38.
Kinda surprising RCA didnt make a hybrid before going all SS.
A sleeve of 6GH8 is a good start. Start with the pair on the
forward board & see what she does. Those two sockets were trouble
also & we changed quite a few.
The noise is probably arcing & usually you get an ozone smell.
Can be coming from focus socket, HV rect socket or wires or
the plastic cup. Flybacks usually melt & short. Sometimes they
burn. Check it for cracks & wax dripping. A little wax is OK
but if its a big pile its a concern.
73 Zeno