View Single Post
  #291  
Old 01-23-2015, 05:42 PM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
Hi Guys, sorry I was all tied up for the last few days.... I've read all the fun
since I was here last, and it seems to me you guys have not resolved the odd
voltages on the 12BY7A....? If that is correct, I was wondering if you checked
the following resistors.... R146, R148, and R139 See attached images so we are
all thinking of the same parts....

Just in case it's not an open feed to the plate, but biased to that 20V grid take a
look at C729, when you follow the path through R133 and L708 it runs over to
a 17V point on the Sync Sep 6AK8 and AGC control 6K 2W, that's got to have
a very influential amount of current.... So if'n C729 is being bad, that could
take the grid strongly to 20V..... Wadda-ya think....?

Heater and other stuff tied me up at wife's parents house, snow might do it
to me for tomorrow, let me know if you got that 12BY7A under control....'OK'

.
Attached Images
File Type: jpg resistors.jpg (52.8 KB, 8 views)
File Type: jpg capacitor.jpg (72.0 KB, 10 views)
__________________
Yes you can call me "Squirrel boy"

Last edited by Username1; 01-23-2015 at 05:46 PM.
Reply With Quote