|
So lets say you put on the Honeymooners, there is a nice steady watchable picture...?
And this blooming that happens, it's during regular programing ?? And if it is -
when you leave the G's Screens, and Kine Bias alone, and turn the front of the set
brightness, and contrast back and forth slowly it seems to work ok.... or not...?
And if you turn to a raster only spot no snow between stations between detentes,
you have a blank screen and if you leave it, the screen is steady...?
And in that spot, adjusting only screens, or bias, causes the blooming...? Are the drives
not effected.... They don't cause any blooming....?
.
__________________
Yes you can call me "Squirrel boy"
|