Quote:
Originally Posted by Username1
Sounds like you nailed it !
I don't remember anything about sparking....
Fingers still crossed.....
.
|
That came up in conversation, after I told him to try a working tube from another set. He has the cover off so it can be seen, which may have gone unnoticed before if it was just installed with the cover in place. This is why long distance diagnosis is so hard. Its nearly impossible to cover all the bases. But to his credit he did note it and report back, with out that little nugget I would not have thought to check it. The knowledge of how a working regulator tube looks is kinda hard to describe, which is why I wanted him to look at one in a good set. So while powering up the bad set he was looking for the correct operation.
I just really really hope this turns out to be the problem.