|
I think I'm going to do the clamp method.. It's too crowded on the bottom to mount a terminal.. Won't fit.. And the way I have the terminal mounted on the top side, it looks terrible and out of place... The only difference in look wise will be a clamp added and the cans slightly elevated.. I can deal with that..
Zeno.. The cans measure in at 1 and a half inch... according to the auction that one fits between 1-3/5.. All I would need to do is drill two holes to mount and it looks like it already has the ground stubs too which I could use solder, but I wouldn't even need to do that, just using the screw holes of the clamp will even ground it... I made it to were the caps in the cans are grounded internally...
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
Last edited by tvcollector; 01-12-2015 at 06:01 PM.
|