View Single Post
  #74  
Old 01-01-2015, 04:48 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Zenith VCR's
After selling Sony Beta for a few years that died due to lack of
rentals. It wasnt tape time anymore, 5 HRs are plenty. And
a Beta machine had a better pix although it was very complex
mechanicaly. Then it was JVC built VHS. Probably the best VHS
made. That lasted abt 5 yrs IIRC, then it was GS machines.
NOT very good. Also GS was involved with Zenith radios for
many years such as the R472 we got by the case. They were good.

Zenith styling
Up till the 80's Zenith could afford to put out a ton of models.
Remember apx 1 in 4 TV's were Zenith, 1 in 4 RCA and the other
half split up between ALL the others. Most differences were minor
such as same cabinet painted different. The guts were all but the same.
A small player with a few % share cant do that.

Hand wiring
Up til the 80's all sets had some hand wiring. Zenith started using
PCB's in B line IIRC such as the 4 tube hybrid abt 1971. They
evolved out of it, by 1980 it was history. Taking away hand wiring
fast would be like Sony dropping the Trinitron or RCA being
a French company !!! It was part of the package that set them apart.
And NOBODY can dispute the ruggedness of them.

System 3
Hand wiring gone. They get a bad rap due to the 9-160 board.
Remember this is one of the most complex sets ever built.
It is sure nice to slip in a new board in 10 mn instead of dealing
with a HOT that blows every few weeks. Soldering was fine
except on the 9-160 & 9-155-01 boards & name me a set that
dont have cold joint problem often for YEARS on the same part
such as a HDT, on/off relay or vert out IC !!! The CRT's
were fine & tons of them are still running, I would guess
50% or more would be still in use if not for the huge changes.
Enuf fer now

73 Zeno
Reply With Quote