View Single Post
  #3  
Old 12-04-2014, 08:04 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,495
Quote:
Originally Posted by Alastair E View Post
I know--Mad innit! I don't know Why it worked--but it did! The PL519 (bit like a 6KD6, so 45W Plate diss) was obviously working very hard, perhaps a dim glow from its anode--but it kept running for about 3 months like that before the CRT was just dead at the end--Not surprising really--It had got pretty hot too, the blue-lat magnet had melted somewhat and the glass inside the neck had gone silvered!.....

Also--a Line O/P valve is used as a switch--not in a linear mode, therefore dissipation in the valve is lower than one would expect,--bit like when they are used for RF work--you can push a 6KD6 to produce 200W or more of RF energy, same principle applies--the valve is still within its ratings as its used as a switch, the tuned circuit does the rest.....

--Even so though, its a bit mad when you think of it!
--The daft things we do in our youth--I would Never do anything like that now--That thing really was a fire-hazard thinking back.....
Okay NOW I can believe that story. You can get a lot out of switch mode supplies, and tubes can handle several times their rated current/power dissipation if it is in the form of brief impulses. Still pretty amazing the horizontal stage and CRT did not fail catastrophically.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote