View Single Post
  #2  
Old 12-04-2014, 07:40 PM
Alastair E Alastair E is offline
VideoKarma Member
 
Join Date: Feb 2013
Posts: 79
Quote:
Originally Posted by Electronic M View Post
Was the horizontal output SS? 30V*4A=120W! the average HO Tube is rated for <20W IIRC, so if it was tube I can't imagine how the horizontal stage could supply that...For more than a few seconds.
I know--Mad innit! I don't know Why it worked--but it did! The PL519 (bit like a 6KD6, so 45W Plate diss) was obviously working very hard, perhaps a dim glow from its anode--but it kept running for about 3 months like that before the CRT was just dead at the end--Not surprising really--It had got pretty hot too, the blue-lat magnet had melted somewhat and the glass inside the neck had gone silvered!.....

Also--a Line O/P valve is used as a switch--not in a linear mode, therefore dissipation in the valve is lower than one would expect,--bit like when they are used for RF work--you can push a 6KD6 to produce 200W or more of RF energy, same principle applies--the valve is still within its ratings as its used as a switch, the tuned circuit does the rest.....

--Even so though, its a bit mad when you think of it!
--The daft things we do in our youth--I would Never do anything like that now--That thing really was a fire-hazard thinking back.....

Last edited by Alastair E; 12-04-2014 at 07:53 PM.
Reply With Quote