View Single Post
  #12  
Old 08-29-2014, 09:07 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by wa2ise View Post
Many capacitors in that set have likely gone bad and need to be replaced. Capacitors from that era have a lifetime that is shorted than the age of that set. The tubes are likely still good, tubes last forever if they sit unused for years, however, caps don't age well (some absorb moisture from the air, and they become electronically leaky, messing up the circuits and may cause circuit overloads. Most people in this forum recap their own TV sets, it's too expensive to have a repairman do it, if you could even find one who knows vacuum tube technology.
I was replacing capacitors in those sets, 50 years ago!
The first one, that had to be changed was the .01mfd cap in the synchroguide circuit. Then a few in the vertical sweep. Then a few 'lytics. They used those paper tube jobs, instead of the twist-lock cans.
The chassis was mounted above the CRT, like a Setchell Carlson, NOT!
Reply With Quote