View Single Post
  #6  
Old 08-21-2014, 12:34 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
35V + 50V = 85V (tube heater total voltage)
117V - 85V = 32V (voltage drop needed to supply heaters from line voltage)
32V/0.15A = 213 ohms (resistance needed to drop 32V)
0.15A x 32V = 4.8 Watts (power dissipated in resistor)

So the resistor seems to be used for the heater supply for the tubes and the right size and rating... I don't understand why a fuse resistor was chosen here, but your replacement would appear to be correct.... you must have a short somewhere.

jr
Reply With Quote