Quote:
Originally Posted by user181
I'm glad to hear your good news. My PortaColor has almost the identical problem. What are the reference designators of the capacitors you replaced? Did you have to replace anything else, or was the cure just those caps?
|
Thanks! I'm happy to have this going again. The .039 @125 volt cap on the power supply board was burned open. I'm positive that was my original problem. The three replaced were C401 .039mfd@ 600 volts according to the Sams, while the set had .039 mfd@125 volt. I replaced with a safety cap .047mfd @275 volt, closest value I could find and it's working fine. C212 .047 mfd@ 400volt, and I replaced with a .047mfd @630volt. C268 .1mfd @ 1000volt, and I replaced with exactly the same value. The set in the Sams is laid out a bit different than my set, like it shows C268 down by the flyback, mine is under the power supply board on a terminal strip. My second problem was the high voltage pot (R273) shorting on the chassis. I must have bumped into it, and laid it down while checking voltage on the flyback back when the failure occurred around the first of the year. I walked away from it for a few months, and finally decided to give it another try. So the three caps, and bending the high voltage pot upright got mine going, nothing else had to be done! I got the caps from Just Radios while I was ordering for my Admiral 19A11.