View Single Post
  #11  
Old 05-17-2014, 01:23 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
The pictures of this TV in your other posts do not show that curvature. Is this something that just started recently? I would suspect hum getting into the vertical deflection circuits, but you said you replaced the electrolytic filter capacitors so I guess that isn't the problem--unless the vertical oscillator or output tube has slight heater-cathode leakage, not enough to cause a visible hum bar, but enough to distort the sweep. My best guess as to why this distortion does not show in the other pics you posted is that you had the vertical size control set for normal sweep, so that any raster distortion would be behind the lower edge of the CRT mask and, therefore, not visible.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 05-17-2014 at 01:27 AM.
Reply With Quote