View Single Post
  #21  
Old 02-28-2014, 08:10 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by user181 View Post
I have a general question about the flyback. I'm reading the SAMS Photofacts for my set (folder 1223), it lists what appear to be a couple different variations for the part that was used for the flyback. One item listed is "core half." What is the core half? I've heard it referred to as a separate "donut" that comes off, but I'm not picturing what part this would be. Can anyone explain this?
The OEM FBT comes in 3 parts. HV winding, pulse winding
& ferrite core halves with spacers & U shaped mounting. If
you use the OEM you should get a new core. Its common to
crack & you need the spacers or it will sing. Also the metal is
cheap & it can break tightening the nuts. GE is the only one I
remember doing it this way & have no idea why. But there
tint control was backwards from everyone else for years. On
my GE oven the temp up & down are opposite from convention.
Go figure..........

73 Zeno
Reply With Quote