Quote:
Originally Posted by dieseljeep
The 17GP4 CRT is not all that common!
Also, RCA metal CRT sets are hard to convert to glass CRT's. The 17TP4 seems like a good alternative for the 17GP4. First thing, I would do is remove the 1V2 tube, so no mistake could be made. High focus voltage could easily damage a low volt focus CRT. Cut the lead to #6 terminal on the CRT socket and try it on chassis ground. Focus will probably be good. 
|
Agree 100%... Many sets with LV focus offer a selection of "taps" to connect to pin 6, something like ground, 150v and 300v, depending upon what supply voltages are available in the set. It is *not* very critical. I have also seen tubes that just have a strap at the base which connects pin 6 to pin 10 (G2).
jr