View Single Post
  #24  
Old 12-22-2013, 08:34 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
OK you got to get the HV going. Almost everything runs
off it inc the CRT filament. Most had a strange start up
design. You may need more than a meter on this one.
Start with the hoz output transistor ( HOT )& see if its shorted.
If not see if you get 120-150 VDC on HOT collector, use the
metal on the HV board as ground.
If there is a small board on the HV board assy see if a
resistor burned IIRC a 2 K 1W. If burned there is more wrong.

73 Zeno
Reply With Quote