good luck happy holidays
oh you may find that just putting in a new 3EJ7 could fix it too, tubes are not like solid state, they can very quite a bit and in some circuits this can have fairly drastic effects. I dealt with this just recently when working on the CTC-12 that had the tint issue. In my case the tint or hue was not being consistent on a fixed image (part would be red part would be purple, and it was not a purity issue).
I had a tube that had some shorts in it that when replaced not only cured the changing hue but also shifted the entire hue toward the green. I could have tried a few other new tubes to see if I could correct the tint shift but chose to just adj a coil and fix it that way.