View Single Post
  #4  
Old 12-02-2013, 06:19 AM
TVTim's Avatar
TVTim TVTim is offline
VideoKarma Member
 
Join Date: Nov 2013
Location: Near Harrisburg, PA
Posts: 578
Quote:
Originally Posted by radiotvnut View Post
I wouldn't worry about the dark area. I've seen a lot of RCA's from that time period and very few of them had bad CRT's. In fact, there are still many of these old sets still in service with good pictures. The main RCA's from this era that I saw with weak CRT's were the 25" ones.
Thank you all. I was thinking that something was causing the carbon and therefore reducing the picture quality.

It's odd. Turn it on and get an okay picture. Next time, it's not a nice and there is blooming. Then, it'll be good again.

One thing is for sure, ALL of the pots have been adjusted. I have the original RCA tech manual for it and just need time to try to reset everything. This will have to be by eye as I have no test equipment.

Should I pull the piece off the tail of the PT and clean the contacts? If so, what do I use?

I'd really love to save this set.
Reply With Quote