View Single Post
  #13  
Old 11-01-2013, 12:04 AM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
I found this old thread when I Google d my RCA's model # tonight and decided to revive it with an update as there was a ton of great input from some of the most knowledgeable people here at V-K that I think will be valuable to people who have come here in the 6 years since this restoration. WOW! 6 years really goes by fast!

Anyway, I still have the set and probably always will as it was my first true restoration although I had been buying and tinkering with sets since I was a kid in high school electronics trade class. Since this restoration I obtained an electronics degree at out local college and for now work as a tech in manufacturing which is about all that is left of electronics repair. I hope to move on to bench work repairing the equipment that I get paid to replace currently. Anyone who has worked around production will understand my endeavor to move on to bench work.

So, just last weekend I fired up the RCA and (as always) it came to life almost as if it were on a showroom floor. However, there were and are a couple of issues that came to light not long after the project. I just haven't gotten around to doing the work. First, the set had a relatively low sound level from the get go. I have another more current thread about battles I am fighting getting good performance out of sets that are working off of digital converters or whatnot. So if you look at that thread you will see that I have discovered that the sets antenna input oddly enough works best with one side disconnected. With that I had decent sound, but I have heard much louder. Good enough to fill the room and hear at the other end of my humble abode.

Second, and finally; the vertical circuitry needs something done to it. There is something that I missed as the top inch or so of the raster is shrunk. It's not progressive as the set warms and over time. It comes on that way and stays that way, but can't be adjusted through height and linearity adjustments. I'm thinking that a resistor has drifted out of tolerance, or perhaps one of the potentiometers has done the same.

Other than that all other aspects of the set are perfect and stable. I wouldn't hesitate to watch it for hours although I don't just out of consideration of its antiquity and to keep the 12LP4 going for a few more years. Heck, some of these old sets are gonna make it longer than we will if we treat them right. I hope this thread helps someone new once again, or is just a good read for us veterans of V-K.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote