|
Well not sure what's wrong with the CRT tester beyond the capacitor that came free. I put the cap back in place and tried again. I set the heater voltage to 6.3V and then turn it to HTR Leakage. It says it's good if it is anywhere in the yellow area of the meter scale. When I try it, the needle drops all the way back and that's outside the yellow range. I then switch it to G1 Leakage and it's the same thing for each gun. However, when I set the G1 voltage and G2 cutoffs, each gun tests good.
I think there are more issues with this tester. I'm pretty sure I wouldn't get the picture I do if the heater wasn't working properly as well as the G1s.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|