|
Good news - I tried fiddling with the controls and I can indeed get a uniform field when adjusted in a certain way. There's no actual "overlap" of the interlaced fields, but rather the second one gets close to the first line and moves around a bit when adjusting the hold, so the unevenness is what makes it seem as though there is a piece of the picture missing.
I suspect the set could also do with an alignment as I find myself at the extreme ends of the fine tuning to get a crisp picture... but I'll need to do a bit more work first - there are some IF resistors I didn't replace because it "works" and I don't have replacements on hand - so I'll be ordering some up in the near future and getting those fellas before I attempt any sort of set adjustment.
I'm fascinated by the whole "spot wobble" solution to the scan line problem though - certainly an interesting approach to an eyesore-- especially the homebrew solution which involves making your own coils and adding a tube to oscillate the beam. You'd wonder if there was a more elegant solution to introduce some high frequency, low voltage ripple into the vertical deflection drive instead... somehow adding on your own coils doesn't exactly seem optimal or too "practical" of a solution since positioning would also depend on the set and electron gun design.
|