Thread: B&W TV Focusing
View Single Post
  #5  
Old 08-26-2013, 10:31 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
I know someone who worked for Tektronix back in the analog TV days. They had a project to use a very high resolution tube for a standard-definition NTSC color monitor, the idea being that it would show the full capability of the studio signal and not hide any defects in the signal either. They killed the project after the first prototype because the visible line structure was intolerable to users.

When defocussing the thing to watch for is if the spot develops a halo one way or the other, reducing contrast. You also might see if one side produces more even focusing from shadows to highlights than the other. If not, the choice is up to you.

By the way, too much sharpness was even less desirable when making kinescope recordings. If there was a line structure on the kinescope print, then the telecine camera would resolve it and cause a moiré pattern when the show was rebroadcast.

The CBS "EVR" pre-recorded video system that used microfilm to carry images was recorded using an electron beam that was wobbled vertically a precise amount to fill in the spaces between lines.

Too much sharpness also results in poor pictures when taking a still picture off the screen, since you are simultaneously trying to expose for the average brightness while accommodating lines that are much brighter spaced by black. The result is that the resulting picture looks very compressed in contrast because the video lines are actually all overexposed, while the average brightness is correct.

The human visual system does an amazing job of seeing both the average brightness and the line structure, due to parallel processes in the brain; but if the lines are too sharp, they become distracting.
Reply With Quote
Audiokarma