Quote:
Originally Posted by DaveWM
well if it checks out (the blanking) then I was thinking something may be a miss in the overall bias of the CRT.
You should get that working (brightness control).
Check all the voltages on the CRT (G1 G2 and Cathodes).
|
The CRT checks out okay on the B&K tester and the G2 voltages were good as well. Could it be possible I didn't set the G2s high enough when I did the grayscale adjustment? I disconnected the IF, turned all G2s down and then turned red up until dim raster and backed off until it disappeared ( don't like the setup line). I did the same for the blue and Green. I didn't see a need to move the taps, so they're on medium.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|