|
does it use the Vari cap or pot for tint?
I had some issues with on off my pc's vector scope was usd to confirm a gated color bar pattern. I needed to tweek up a couple of the transformers in the color demod (in my case I did not have good green at the grid of the crt).
The color delay on some of my is a problem too, as you advance the fine tuning you can see the three colors actually split apart and shift to the right. I end up detuning to bring in color the best. That being said the color is way over saturated when tuned normally, so I was thinking maybe the chroma is too far up the IF slope. My goal is to check out the alignment on one of these in the near future as I get more exp with my BK 415.
I don't recall the tint control effecting the right shift but think I will give it a try now that you mentioned it.
|