View Single Post
  #13  
Old 07-30-2013, 06:51 PM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
Quote:
Originally Posted by technicolor View Post
so let me ask u something there squirrel,

assuming i don;t have the time or patience to become a tv repairman at age 47, is this a good checklist to run on this set

1) check all vacuum tubes
2) check crt
3) recap set
4) check all resistors for shorts

Becoming a tv repairman is the hobby you chose. Learning how each section of a tv, radio, or any other item works means you can skip checking items you don't need to. For example, when you said you turned it on and you immediately got a very loud hum, to me this is a power supply problem. This is the first thing to address. This could be a bad, or shorted cap, bad or shorted rectifier diodes.

Also learning what each part is likely to do when it goes bad, will allow you to look at symptoms and give you a starting point, eliminating items that can not possibly give the symptoms you have.

You are just not familiar with this stuff.... If it were a car, and it gave you trouble, you would have an idea where to go to start because of your familiarity with them.

If your stereo part is transistorized, then use this to take a look at how the rectifier circuit works.

http://www.eecs.tufts.edu/~dsculley/...s/diodes3.html

This video is very good:

http://www.youtube.com/watch?v=cyhzpFqXwdA

Youtube has a video for everything, and you could learn quite a bit from this.
__________________
Yes you can call me "Squirrel boy"
Reply With Quote