|
c62 which is .01 was never changed , it was a micamold that was tucked under L70 and hidden , so i replaced it and i seen sweep , it was letterbox but i wasn't running at full voltage either , one cap could ruin your whole day , this is why i've had the arguement with a couple people that its impossible to make a set run with the original capacitors all it takes is one , so assuming that the vertical wasn't full because i was running at a lower power the problem is solved , i wouldn't have found this if you didn't ask about the 4.7meg resistor which might not be 4.7 in the set , that and r57 may not be the same values as in the schematic , but progress has been made
mike
|