Thread: Sonny & Cher
View Single Post
  #11  
Old 07-10-2013, 09:52 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
Quote:
Originally Posted by Charlie View Post
...
A technical observation I made- It seems there’s a time delay in much of the video… especially when they are moving around kinda fast. For instance… if someone moves their head back forth, it seems to take a frame or two for their hair to catch up. Sometimes you see what appears to be “trails” left behind lights. It’s kinda like a really slow refresh rate. I don’t know if this was intended to be this way, or if it was due to cheesy equipment. I might expect to see these artifacts in videos from the 1950’s, but not the 70’s.
Not intended to be that way. What you're seeing is Plumbicon pickup tube lag and "comet-tailing." The lag is because the target didn't discharge completely in one scan - and the amount of incompleteness depended on the brightness of the particular part of the picture. Plumbicon cameras had tiny incandescent faceplate lamps built in that flooded the whole picture with a low light level; then the blacks were adjusted electrically to bring them back down to true black. This meant that the target didn't have to discharge completely to reach black level, so it reduced the lag; but it never got rid of it completely.

The trails, or "comet-tails" on highlights occurred when a highlight was so bright that it could not be discharged below white level for several scans. You would see this on shiny musical instruments and jewelry. Camera circuits and Plumbicons were developed that could reduce this by sensing an overly bright spot and instantaneously turning the beam current up to discharge the highlight faster.
Reply With Quote