|
You're going for need an RF sweep gen. that covers 20-30MHz for the older IFs and 40-50MHz for the newer IFs. If you want to align a tuner, you'll need to go even higher.
Those two you linked are function generator that only go up to 2/4 MHz and better suited for lab or audio work.
I've been using a Wavektek 1002 and 1080 for my alignments lately. Both are overkill, but I got them cheap on eBay (less than $100). I didn't need to do any repairs or calibration to either.
All you really care about for accuracy is the markers which are crystal based. Or you can use external markers from any accurate source you have handy.
|