Quote:
Originally Posted by Eric H
I guess the problem her is that you don't need the focus part but do need the centering part and since they are part of the same assembly it presents a problem.
It should be possible to use a small magnet or the centering rings from a different type set to pull the picture back in line, you probably should just remove the entire focus/centering assembly so you can put the centering magnet far enough forward that it doesn't interfere with the Ion trap function.
It needs to be directly behind the yoke.
|
I was just wondering if a purity ring from a delta gun rectangular CRT, such as a 25xp22 would work? If the blue lateral magnet is a part of it, it would have to be removed.
Just a thought!
On some of the early sets that had an electrostatically focused CRT, they used a centering device, that was not part of the yoke cover.