|
Yep, that's the Focus assembly but the lever with the Wing Nut is for centering the picture, it slides up and down and side to side.
Since your tube is electrostatically focused you probably do need to remove the focus magnets but you still need to find a way to center the picture.
I'm not sure if the focus magneta also provide the magnetism for the centering rings or not.
It might be possible to retrofit some centering rings off of another set that used electrostatic focus, they are just mounted on a plastic cover that goes over the back of the yoke.
You might try it with the whole assembly put back in place and see if it interferes with the Ion trap or not.
|