Quote:
Originally Posted by Zenith26kc20
I have had to slightly flex the plastic carrier to loosen it to remove the chassis. Also, on some there is a 1/4 inch hex in front with a plastic retainer. It can hold the chassis in.
The flyback on those may come as a kit. Don't leave out any steps as failure will result immediatley. My old boss was notorius for just putting in the new flyback. As he said, the mods aren't needed.
Smoke and a new flyback turned old.
Those are great sets! If it has the tuner on board (PC board tuner, not a separate silver box) do the tuner wrap repair. It usually will rear it's ugly head after any work is done as it breaks up the solder connections on the tuner from flexing.
|
It has the separate TV tuner in a metal box. I love this TV, it has so many features that I use: PIP, Closed-Caption, multiple inputs, a great picture, etc. Just before the flyback went, I bought a brand new OEM remote for only $19 delivered. The flyback I was able to find is an RCA OEM that comes in the original box but only the flyback, no other parts. I will need to reuse the wires connected to the flyback so I have to remove them but I don't know how.