|
I have had to slightly flex the plastic carrier to loosen it to remove the chassis. Also, on some there is a 1/4 inch hex in front with a plastic retainer. It can hold the chassis in.
The flyback on those may come as a kit. Don't leave out any steps as failure will result immediatley. My old boss was notorius for just putting in the new flyback. As he said, the mods aren't needed.
Smoke and a new flyback turned old.
Those are great sets! If it has the tuner on board (PC board tuner, not a separate silver box) do the tuner wrap repair. It usually will rear it's ugly head after any work is done as it breaks up the solder connections on the tuner from flexing.
|