|
This is the 10" admiral right ? i've done 3 , one was 12" but the same chassis , they are not hard to work on , you replace all the paper/wax caps , replace the electrolytics , check the tubes , and if you want to go as far as i have you check all the resistors , unless theres something odd wrong it should work after that, cost -- well if you get the capacitors from mouser they shouldn't be too expensive , cost could range from $10 to $20 , just a rough guess , maybe $20 is a bit high unless the prices on things have gone up.
I'm in NJ if you can't find someone to help , about 75 miles from stamford.
Mike
|