View Single Post
  #19  
Old 02-11-2013, 03:55 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by dieseljeep View Post
Regarding those mica caps in the base of the If tranformer.
Like most of the mica caps, they aren't sealed like the ones we're used to seeing.
They're built in the base of the IF transformer, by means of a mica sheet and silver deposit coating. There's contact fingers, contacting the silver, subject to problems of moisture, corrosion and dust.
My set has gone 53 years without those capacitors breaking down (knock on wood), so I'm not expecting any problems with them at this late date; I'm not saying they won't eventually break down (they very well might), but if the caps have gotten past the half-century mark and are still doing what they need to do, I'm not going to worry about it. The radio plays extremely well at this time, no lightning-like static crashes or other noises on FM (I don't use the AM side -- in fact, I disconnected the AM loop the last time I had the back off, since there are no more AM music stations left in my area or even within 80-90 miles of here, as there once were).

As I said in my last post, this radio is high fidelity all the way, as Zenith intended when the set was built. I particularly like the idea that the radio has a real tweeter, as opposed to an electrostatic one as my Zenith K-731 (1963) has. I wonder when Zenith stopped using real high-frequency speakers in their radios, replacing them with those dinky little blue plastic things fed directly from the plate of the 35C5 audio output. The radio sounds plenty good enough to my ears with the plastic electrostatic tweeter and 7" (approximately) main driver. The only problem it has, if you want to call it a problem, is that the tone control is extremely touchy -- it will go from full-range to bass or treble long before the control gets to either end of its rotation. I'm thinking this is due to a bad paper capacitor or even an off-value resistor in the tone compensation circuitry, but since the radio still works half decently, I won't mess with it. Maybe the next time it needs a new tube, etc. I might look into the tone problem, but for now I intend to enjoy the radio such as it is.

BTW, when did Zenith start using these silver-mica capacitors in their radios? I have an H511 table model (1951 vintage). This radio has two IF transformers, but I have no way of knowing if these transformers have the silver-mica caps in their bases or not (I haven't had the chassis out of the cabinet in some time). Since the H511 series were AM-only radios, and the silver-mica capacitor breakdown problem seems to have shown up more in this type of radio than in any other Zenith radio of this vintage or even later (such as the C845 series), I wonder if there ever was such a problem in the H511 series.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote