|
I've never used a 647A, but the 453 is a great scope for general purpose troubleshooting. Far better than the scopes used by most TV shops back in the day. Even better if yours has the "Mod 127C" option, which adds a built-in TV sync separator to the triggering circuits.
Tektronix made a special X1000 high voltage probe (P6015), which enabled waveform measurements up to 40 kV. They are hard to keep in working order today, as they used a liquid freon dielectric fill, which slowly evaporated and is very difficult and expensive to obtain these days.
There isn't any real need for waveform measurements in the high voltage circuits of TV sets, anyway. A cheap high voltage meter or HV probe for your DMM is all you need.
|