View Single Post
  #9  
Old 01-20-2013, 06:38 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I've suspected that the stator part of the cap is soldered in place during manufacturing, and that they may have used thin plastic or paper inserts to position the stator caps plates just before soldering. Look at the solder globs between the metal pieces crimped to the reddish brown insulation and the metal frame of the stator cap, just above where you put your plastic spacers.
__________________
Reply With Quote