Quote:
Originally Posted by Kamakiri
Moved this thread over, as it's now becoming more of a technical discussion, or, from this point, a
Got the set repaired and reassembled yesterday, and powered it up. Slowly, it came to life....I say slowly because I must have jarred the controls way out of position, and I had to tweak everything. It started to get a picture, then BANG! You'd swear there was a firecracker inside the set. Scared the bejesus out of me!
But then the picture pulled in perfectly....perfect color, the vertical locked dead on, and everything was excellent.
What.....the....hell!
I pulled the back this morning, and it wasn't the new film caps I installed, because they're just as they were. What the hell kind of BANG can cause a set TO work properly? Usually, it's the opposite way around!
Pics of the set assembled, and then working perfectly after it threw out a loud sudden cough 
|
In all probability, one, or, more of the back controls has "tin whiskers" shorting out the B+ causing the loud explosions. Nof goof for either the controls, or, your electrolytics. This is a very familiar problem on these GE Porta Color sets.
You could try dismantling the controls, and, cleanning them well, including with a soft tooth brush, or, replace the trouble makers.
Bill Cahill