View Single Post
  #11  
Old 01-07-2013, 07:58 PM
Zenith6S321's Avatar
Zenith6S321 Zenith6S321 is offline
VideoKarma Member
 
Join Date: Aug 2010
Location: Charleston, West Virginia
Posts: 303
I had the same problem with my Hickok 539B's bias pot. I found a couple of places where the resistance wire had broken. I fixed it by carefully locating where the two breaks were, and then applied conductive paint. I got the paint in a kit at an automotive store for use to repair a rear window defroster resistive grid. The paint has a much power resistance than the pot resistance wire, which I was not able to solder to. That was 1.5 yrs ago and it still works fine.

Dave
Reply With Quote