Quote:
Originally Posted by holmesuser01
The board pin connectors are known for bad connections.
The video drive board has a big white flat upright assembly on it with many PC connections. I've re-soldered these with good results in the past.
CRT could be bad, but I tend to doubt it, being a Zenith.
|
I've done about all I know to clean and reseat all the modules. Is there a trick to get better contact?
The video drive board is new (well NOS) and it had the same issue with the one it replaced. Unless something else is causing an issue with the video drive board.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|