View Single Post
  #20  
Old 12-19-2012, 03:28 PM
mpatoray's Avatar
mpatoray mpatoray is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Near Youngstown Ohio
Posts: 258
When i bought Caps form Just Radios i ordered Axial caps to replace the under side ones. I have heard suggestions to use rubber tape around them to fill them out so they just snap back into the original holders. The axials ordered are 105C rated caps so they should be good, and i tried where possible to go at least 50v over in spec form the original. All the Film caps are the little yellow 630v ones from just radios and 1 Panasonic 1.25 KV one to replace the singe 1 KV cap.
Reply With Quote
Audiokarma