Thread: Rca 8-t-241
View Single Post
  #26  
Old 12-18-2012, 01:40 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
Quote:
Originally Posted by Geist View Post
Hi All;
I have a 8T244, which is like yours.. On the other site, I have been told not to plug mine in any more until I Re-cap it.. I had run it for hours at a time about 3 to 5 years ago when I last had it on the table to work on.. I would be interested in what you did to Re-forn your caps.. I can't say it will help my set, but I can look at what you say and then decide.. I also had problems with it arching around my Flyback, and even after doping and such it sttill would arc a little.. So, I finially just put an old Bicycle inner tube along the top around to the bottom of the flyback, and no more arching.. I know that some would scoff at that, but it works..
THANK YOU Marty
I have owned and regularly used an 8T243 for forty three years. It still has its original electrolytics (all of them) and it works fine. I replaced the paper capacitors in the early '70's with (then) brand new Sprague Orange Drops.

I have cleaned out the HV cage every decade or so. Are you seeing actual arcing or is it a corona discharge (eg hissing)? Problems or corona are generally due to contamination (dirt) or sharp points. Making sure everything is clean and connections are well rounded eliminate the problem.
Reply With Quote