View Single Post
  #9  
Old 11-05-2012, 07:46 PM
N2IXK's Avatar
N2IXK N2IXK is offline
Technohippie
 
Join Date: Apr 2011
Location: Sittin' on the "Group W" bench...
Posts: 817
Re:4422 vs. 931A

Many of RCA's 4000-series tubes were "specials", sold only to one customer. This appears to be one of them, as I can't find ANYTHING about it in my somewhat extensive collection of tube manuals. Not in any of the 3 different vintage RCA/Burle PMT manuals, the RCA HB-3 tube handbook, a couple RCA specialty tube databooks or even Sibley's "Tube Lore". A real orphan, apparently.

My best guess is that it was a "selected" 931A pulled from normal production runs and rebranded. Note that "selected" doesn't necessarily mean a better tube. The TV analyst (flying spot scanners in general) is not at all a demanding application, as there is plenty of light available and frequency response isn't all that high. Perhaps the 4422 is a tube that wasn't "good enough" to be a full-spec 931A, and was sold to B&K at a bargain price?

The 931A works just fine in place of the 4422, and is much easier to find.
Reply With Quote