View Single Post
  #6  
Old 10-28-2012, 10:19 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
A year or so ago, I fixed a CCII with not HV and it had an open horizontal driver transformer. There's also a big power resistor on the flat part of the chassis that will open and kill B+ to the horizontal output circuit. I've also seen defective horizontal oscillator modules kill the HV, as well as the cap/resistor in the HOT emitter circuit. Last; but, not least, the HV triplers were high failure parts in these sets.
Reply With Quote