View Single Post
  #5  
Old 09-28-2012, 02:47 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by N2IXK View Post
Are you thinking of a switchmode AC-DC power supply?
More modern, and smaller ones, look to be switchmode DC to DC converters running somewhere around 30KHz or higher, with subsequent choppers to make it look like 60Hz AC squarewave. Assuming that the DC-DC conversion has no DC path between its primary and secondary, or if the negative end of the secondary side is tied to the input 12VDC, you can use it for B+ ahead of the 60Hz chopper ckts. You may need additional filtering to get rid of switching crud off this B+.

If you have an inverter that runs at 60Hz 12V to a 60Hz transformer, and the secondary is isolated, just feed it into a bridge rectifier and filter caps to get the B+.
__________________

Last edited by wa2ise; 09-28-2012 at 02:54 PM.
Reply With Quote
Audiokarma