View Single Post
  #10  
Old 09-17-2012, 02:04 AM
Winky Dink's Avatar
Winky Dink Winky Dink is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Meridian, Idaho.
Posts: 583
I recognize that my multimeter capacitor testing isn't good for much other than confirming a nominal value. I thought about trying to substitute for the 20pF caps, but the best I could do with materials on hand was 50 .001mfd caps in series. I ordered an assortment of 10pF-500pF caps today.

I think the focus problem is fixed. A focus pot lug was nearly touching a lug on the adjacent pot. I pushed them apart and ran the set for 30 minutes with no focus problem.

I rechecked my circuits multiple times, but if I've done something that I thought was right the first time, then it's hard to recognize it as an error. I'll try tracing the circuits backwards from the way I would usually look at them. I may even experiment with reversing some of my "corrections."

Thanks for addressing my many issues.

- Winky
Reply With Quote
Audiokarma