Quote:
Originally Posted by waltchan
Finally, my Top 10 NOT recommended and junkiest VCR models ever made in history (ranked in order) due to multiple problems, had poor reliability in the past, or repair costs are exceedingly expensive due to aging concerns and poor design in the first place:
9. Any JVC VCR models made after 1995 (carriage problem).
|
That don't jibe with my experiences with most of the ones I have.
I have 2 different S-VHS models that have been trouble free despite seeing weekly+ use for several months. I also have 4 S-VHS-ET models from around 2003(they have the same mechs and general design, but some have more features). Two of which have seen HEAVY weekly use for at least 2 years now.....Of those 4 units only one ever had an issue and that was that it ate two tapes within as many months(not the worst considering how many tapes it normally sees in that time period, but 1 eaten per year is about my tolerance limit). I fixed that issue by swaping the whole mech with one from a lesser used model with less features. That swap was sooo easy...remove three screws for the top, remove four more that hold the mech in, and a ribbon wire connection, then pull the mech right out...easier than chassis removal on some tube radios!
I just got a NTSC/PAL/MESECAM multi-standard deck that is apparently a bit confused on it's tape handling so not all JVCs of that period are as dependable as others.