|
One of my primary functions in engineering for an educational cable access station before it shut down a couple months ago was maintaining Sony VO and VP series 3/4" decks. Our scheduled playback consisted entirely of 3/4", from a bank of 8 VP-9000's and 2 VO-5000's, along with every other variation used in the duplication, editing, and satellite downlink recording systems. At least a few decks failed every week.
Your VO-5850 looks like it hasn't been abused much, so that's good. From my experience there are a few things you should check before using it much. First, the rubber pinch rollers don't last long in any of these decks. They turn shiny and hard with heavy usage, and when they do they tend to diagonally crease the tape every couple inches, causing basically irreversible damage (we lost several master programs that way, since you don't notice the problem until AFTER the program is played). Second, the motor and gear assembly that operates the loading ring should be cleaned and lubricated (with something like silicone grease), as the gears tend to wear quickly, causing frequent jams during loading/unloading. The same goes for the tape elevator mechanism, which is easily removed by disconnecting the connector on the back right corner of the assembly, and removing the retaining bracket from the top. Also, if you want to manually test the mechanism without having a tape loaded, simply disconnecting the tape elevator connector will bypass all the sensors, and allow you to enter any function without putting the deck into an error mode. This trick was very useful for troubleshooting, and distributing the silicone grease on the gears before risking tape damage. It works on any non-BVU font-loading Sony U-Matic deck.
Of course, our machines were used a LOT over the years. 2-4 hours of playback every day from the time they were made up to recently. We burned through pinch rollers, belts, idlers, heads, motors, and gears like none other. Fortunately we had a large NOS parts stock, which I got when they shut down to maintain my BVU's. Your deck has likely had a much better life, so with just a little maintenance it should last years.
As a closing thought, those Sony decks aren't as reliable as the JVC's, but when Sony decks break, any part can be accessed and replaced in less than 10 minutes. The JVC decks need a lot less work, they're faster, gentler, they have more precise transports (compare the two side by side with the tops off rewinding a tape to the beginning and see how they handle it... like night and day), and no belts, but troubleshooting them can be hell in the rare event that something goes wrong. Both produce great pictures and sound.
|