View Single Post
  #7  
Old 08-14-2012, 10:56 AM
AiboPet's Avatar
AiboPet AiboPet is offline
"micro" and quirky
 
Join Date: May 2012
Location: I'm in San Diego, but lived in Hong Kong for a long time
Posts: 707
Yup Coogar....

Saw that just after posting this last reply.

The "if I get real adventurous" part means getting a good magnifying glass and taking a REAL good look at the end of this little CRT. For these little sets, I'd even be okay with just jumping a WIRE across to the neck board. It's not like a little late '80's plastic mini TV set is any real restoration.

It would be a chance to do something "weird" to get a set going again.....OR.... The thing ends up in a shoebox because I took a DREMEL to the back of that little CRT trying to chip in to that pin (and then do EXACTLY your solder idea)....and cracked it.

If I can see even a LITTLE metal showing and can just solder a resistor lead to it or something with a REAL small soldering tip....it would probly work at least just to reassemble the neck board at least once. I'd worry just pulling the board off again would just break the new pin. Again....it's not like I'm ALL bent outa shape because this happened to one of my old Sony sets or anything. It's just one of those "I'm GONNA get this to work again" projects.....because the little thing was like 30 seconds from being thrown in a dumpster when I told him I wanted it
__________________
My current "holy grail" is trying to get enough parts together to get a Singer TV6U going. Been kicking my ass for nearly a year now :-P
Reply With Quote