Also theres some good info in this thread on many of the common issues with the 16.
http://videokarma.org/showthread.php?t=255016
Try and read through the whole thing.
A few of us 16 owners should get together and do a full 16 thread. I know have way to much experience with this chassis, from common failures to subbing flybacks and other parts.
At this point with this chassis, the first things I would say is change the .01uf caps that drive the 6gu7s, the color burst crystal, the thermistor, and maybe the electrolytics. There are also a few white tubular caps, one in the vertical circuit that likes to short and smoke the 1000 ohm resistor. Its conected to the plate and under that chassis.