View Single Post
  #23  
Old 07-09-2012, 11:15 AM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Yes, it's easy to find toning lacquer and clear lacquer. I use Mohawk brand lacquer, available from http://www.tubesandmore.com/ and other suppliers.

I wouldn't worry about the lacquer reacting with the original finish. The photo-finishes used on older (1930s) radio cabinets appear to have been covered with lacquer. I'm not positive what was used for CTC-11-vintage photo-finish, but practically all radio/TV cabinets were done in lacquer because it dries fast. It's also easily reversible (don't like the results, wipe off with lacquer thinner and try again).

You are right to avoid poly. Apart from guaranteeing that you will go straight to Hell along with all the people who destroy furniture for antique malls, it is pretty impossible to remove except with a belt sander. So you had better apply poly perfectly the first time, cuz you'll not get a second chance. Poly also looks wrong. Nothing says "cheap antique mall" better than a thick, slopped-on coat of too-shiny polyurethane.

Whatever you use, I would first clean the entire cabinet using mineral spirits, to remove everyday grime, furniture polish, etc.

I think a satin finish looks best on most old cabinets. If you insist on using gloss for some reason, you can buff it down a little with #0000 steel wool after it cures.

Applying a clear coat over the whole cabinet might improve its appearance a tad. My 1958 Philco Miss America TV has photo finish, and although it's in wonderful condition, it looks "dead" or lacking depth compared to a real wood finish. I have sometimes thought of adding a coat of clear just for the heck of it, but that's far down on my list of priorities.

Just my $0.02.

Phil Nelson

P.S. If you read refinishing forums, you may hear that the formulation of "lacquer" has changed in recent years owing to environmental regulations. Although interesting to purists, that doesn't seem to matter for our purposes.
Reply With Quote